INNO Tyre Hold 2 INA389
£179.95
Code: INA389
In stock
INNO’s Tyre Hold 2 rack is another innovative and beautifully made product from Japan’s market leader. The bike is held only by its tyres, so no part of the rack touches the bike frame or cables – making this rack the ideal, and often only, option for bikes with carbon frames, or for non-standard shaped frames that don’t fit a standard bike carrier.
INNO’s Tyre Hold 2 rack is another innovative and beautifully made product from Japan’s market leader. The bike is held only by its tyres, so no part of the rack touches the bike frame or cables – making this rack the ideal, and often only, option for bikes with carbon frames, or for non-standard shaped frames that don’t fit a standard bike carrier.
INNO’s Tyre Hold 2 rack is a beautifully designed and easy to use bike carrier from Japan’s market leader. The bike is held only by its tyres, so no part of the rack touches the bike frame or cables – making this rack the ideal, and often only, option for bikes with carbon frames, or for non-standard shaped frames that don’t fit a standard bike carrier. It's the ideal way to carry carbon framed bikes with non-standard forks or disc brakes which won't fit in a fork mount carrier. Fitting your bike to the rack is incredibly easy: Open the arms, place your bike on the carrier at which point the bike rolls into the front wheel holder and is self-supporting, allowing you to use both hands to finish the job. The rear wheel holder applies gentle extra pressure on the tyres as you press down the lever and lock it. Other features:
This carrier fits around bars up to 90mm wide by 30mm deep, so it will fit all our CRUZ bars. It fits the Atera steel bars and Thule SquareBars, the 'INNO long bolt adapter kit' (listed below) is required for Thule Evo WingBars and Atera aluminium bars. Unfortunately it doesn't fit to Whispbar/Yakima bars, Thule Pro or Slide bars, Dropracks, as well as some other bars.
This carrier is part of our "Pick and Mix programme", where there are discounts for multiple purchases of any of our roof mounting bike carriers, and you can mix cheap and expensive. For example, order one 'Tyre Hold', a cheaper Atera GIRO AF+, and a Thule 532, and get the cheapest price on all of them. Change the quantities in your shopping basket (and press "Recalculate") to see what happens! This carrier is priced as low as £159.95: Exchange scheme: Roof mounting bike carriers are part of our 90 day exchange scheme. The bottom line is that if you aren't satisfied that the "INNO Tyre Hold" fits the bill you can exchange it for an alternative roof mount, or a tow bar bike rack.
|
INNO Tyre Hold bike carrier |
INNO Tyre Hold 2 INA389 Reviews
Les S -
Vehicle type: Estate
I have other bike racks from different manufactures ( Thule ,atera ,halfords) but this rack is the most secure and also the easiest to use and it does not touch the frame . I have carbon bikes and the rack is superb. Great product
Ged P -
Vehicle type: Estate
As I have a rather expensive carbon bike, I was not keen on using one of the usual bike racks where there is a bar connected to the frame. Moreover, I was also concerned with security - both in terms of the bike possibly being removed, and also being secure on top of the car. (I had visions of being stuck at traffic lights in the car, and then someone rushes up and nicks it. Or I suddenly notice that the bike has embedded itself into the bonnet of the car behind). I needed something to reassure me...quick!
The INNO bike holder resolves both of these issues. The bike is not only locked to the bike rack, but the rack itself is designed in such a way that it can't be easily removed. And the rack doesn't even touch the frame. This is undoubtedly the best bike rack around, although thieves might disagree.
I recently bought the bike and the shop staff all came out to look at the rack. They even started looking up the Roofbox Company on line to check things out. I suspect some more sales. What else can one say?
Jonathan F -
Vehicle type: Hatchback
Very good product.
Nicholas T -
Vehicle type: 4x4
A fantastic product. Easy to install and simple way of carrying bikes securely.
Michelle M -
Vehicle type: 4x4
Excellent product, have used with carbon race bikes and 29ner mountain bikes with no issues whatsoever.
About our reviews: We test, and often use personally, almost all the products we sell, and we stand behind our comments and recommendations unless customers convince us they need changing. Our Customer Services and Workshop staff also have input into our recommendations. But it's because we've learned a lot over many years that customer feedback is so important. Fresh, first time out opinions are the most useful ones, and in any event we certainly don't have access to the full range of vehicles that our customers have between them. Product feedback from existing customers helps our new customers make choices, and also helps our suppliers with their product development. We e-mail our customers a week or so after their order arrives and invite them to send in a review. Some reviews are suitable for multiple products. Where appropriate we may, for example, use the same review for a number of different roof bar products where the only difference is the length of the roof bar. |
Not suitable for bikes with mudguards fitted very close to the tyres or bikes with rear kickstands. *Fits bars up to 90mm wide by 30mm deep. A long bolt kit is also available separately for bars between 30mm and 50mm deep. Requires at least 30mm clearance between the bottom of the roof bar and the car roof.
Roof bar compatibilitySteel (22mm x 32mm) barsYes. Fits bars up to 90mm wide by 30mm deep Aero barsYes. The Long Bolt kit (listed below) is required for Atera aluminium bars, CRUZ aluminium bars and Thule WingBar Evo. This rack won't fit Yakima Whispbars, Thule Pro or Slide bars, Dropracks as well as some other OEM bars.* Min. distance between roof bars600mm Max. distance between roof bars900mm Bike compatibilityMaximum number of bikes1 Maximum bike weight23kg Fits tyre widths up to2.7 inches Maximum wheelbase1200mm. Minimum wheelbase: 850mm Maximum wheel size29 inches General informationBrandInno Guarantee2 years Length1450mm Width250mm Weight6.6kg SecurityBar to carrier lockYes Carrier to bike lockYes |
Delivery charges and arrangements:We charge a contribution towards delivery costs, depending on what you order, where you live, and how quickly you want the goods. These are our standard charges; there are usually surcharges for all offshore destinations and some remote postcodes - for details please see our delivery information page.
Delivery of other items
Delivery timesDelivery times are calculated in working days (Monday to Friday, excluding Bank holidays). Cut-off times for Express Delivery orders
Delivery FAQsWhen will my order arrive? What about Next Working Day delivery? Is my delivery day guaranteed? Do I need to be at home? Payment options:We take the following cards, and also PayPal. Please note that the entry on your card statement will be from "The Roof Box Company". Secure paymentsOur website is secured by Sectigo (formerly Comodo CA), the largest commercial Certificate Authority in the world. |
Deciding which bike carriers to buy is not always easy, especially as you may not have had experience of using bike carriers before. We hope that our buying guides provide useful guidance about which bike carrier 'strategy' will be most appropriate for your circumstances, as well as highlighting the best features of particular models. We also have troubleshooting FAQs - for example, some customers struggle at first to fit four bikes onto a tow ball carrier, and wonder whether a different carrier would allow the bikes to be spaced wider apart. (It won't, but we have some good tips which make bike fitting much easier.) Our bike carriers Exchange Scheme covers roof mounting and tow ball mounting bike carriers only. Rear door mounting / strap on carriers are not included, and nor are roof bars. It allows you to exchange within 90 days of invoice date. Most exchanges are for roof mounting upgrades, or are tow ball carriers with very basic tilting systems being exchanged for easy to use sliding / tilting carriers. These are the rules of the bike carriers Exchange Scheme:
This is how the exchange scheme works:
Please note: we can only collect items from mainland UK.
|
To find the spare parts you need, please see the diagram below, identify the product codes, then choose them from the list below. If you need more than 1 of any item, change the quantities in the Shopping Basket. |
Fitting PDFs INNO Tyre Hold - how to fit the bike |